MO. - FR.: 9AM - 7PM
Beijing Jinwei Kangda Medical Instrument Ltd.
Eng CN
TEL:+86-10-63394999
PRODUCT
Home / Product> Kangda Cast and Splint> Orthopedic Splint
> PRODUCT
FOR
Meter Roll Splint
Model: KD3180
Characters:
Size:

7.5cm×450cm 

Introduction

Kangda Splint roll is used for orthopedics, which consists of a knitted Polyester&cotton and water-activated polyurethane resin.

 

Specification and Size

Type        Code No.     Size                           Package
3in×180in  KD3180     7.5cm×450cm       1Roll/Box,4Rolls/CTN
4in×180in  KD4180     10.0cm×450cm     1Roll/Box,4Rolls/CTN
5in×180in  KD5180     12.5cm×450cm     1Roll/Box,4Rolls/CTN
6in×180in  KD6180     15.0cm×450cm     1Roll/Box,4Rolls/CTN

Characteristics

1 20 times stronger and 5 times lighter than the traditional plaster cast

2 Harden fast :functional stength will be achieved in 20 mins

3 Good air-permeability ,Water-proof,Good X-ray radiolucence

4 Easy operating and no harm to patients


Storage

Be careful not to break the package.
Store KANGDA Splint(Poly) at room temperature.
NOTE: Storage at higher lower temperatures may affect the shelf-life and handing properties of the product.
Damaged products by careless handing cannot be replaced. Please handle and store them carefully.

The shelf-life of KANGDA Splint(Poly) stored by the above method is about two years.


Operation

1.After opening a bag, soak the whole set into lukewarm water for 20-30 seconds.
2.Wipe-out excess water on both sides with dry cloth
3.Attach GR-2000 splint to affected area and apply the bandage around splint to fix.
4.All the above process will take only 5 minutes


Recommended Amount of Usage

Size        Use
3in   Children's wrists, ankles, and arms and legs
4in   Children's legs and ankles, adults hands and wrists
5in   Adult's arms and legs
6in   Adult's arms and legs


Warning

1. The higher the water temperature is, the faster KANGDA Splint(Poly) hardens.
2. The setting time becomes shorter as the water absorption time increases.
3. KANGDA Splint(Poly) can be used without immersing it in water if slow setting is needed. It may take approximately 15 minutes for the splint to harden without immersion in water.
4. The thick side of non-woven fabric should be applied to the desired area of the patient

Beijing Jinwei Kangda Medical Instrument Ltd.
CONTACT

Beijing Jin Wei Kangda Medical Instrument Ltd.

Add:Room 1406-1409,1st Building, No. 14 Courtyard, South Road of Western 3rd Ring-Road, Fengtai District, Beijing 100073

Tel:+86-10-63334994 /63394999

Fax:+86-10-63334994


COMPANY
Copyright © 2018 KANGDA copyright
- Technical Support:35.CN